Gold Session Liquidity Free is an educational indicator for studying price action around trading sessions, completed Asian ranges, previous swing levels, and closed-candle breaks. Published by fxliner, it brings these observations into one chart alongside trend context and a manual risk-planning panel.

This guide covers Free v1.10 for MetaTrader 4 and MetaTrader 5. The editions share a purpose, but their calculations, settings, alerts, and data buffers differ. A marker describes a condition detected in candle data; it does not identify actual resting orders or guarantee the next price move. Neither edition places trades.

Cover image: Original concept illustration of two separate price-pattern observations. This is not a platform screenshot or a forecast.

MT4 and MT5: what is included?

Both editions display completed Asian high/low levels, sweep markers, swing-break markers, an H1 EMA context by default, and an equity-based planning budget. They run on the chart’s symbol, so use your broker’s actual gold symbol, including any suffix. The published MT4 source and MT5 source are the references for the distinctions below.

Free v1.10 feature comparison — swipe sideways on small screens
Feature MT4 MT5
Sweep reference Confirmed prior swing high or low Confirmed swing or completed Asian high/low
Sweep filters Penetration, reclaim/rejection close, and wick size Those conditions plus close position, selected session, and a pre-sweep structure condition
Session role Dashboard context; sweep detection is not restricted to a chosen session Enabled-session settings filter sweep detection and experimental signals
Trend context H1 EMA20/EMA50 by default; periods adjustable EMA20/EMA50 by default; periods and trend timeframe adjustable
Manual volume estimate Tick-value/tick-size calculation requiring independent verification Broker-aware profit calculation through OrderCalcProfit
Experimental BUY/SELL system Not included Included, switched off by default
Optional alerts Educational sweep pop-up Experimental-signal pop-up, sound, or push
Public indicator buffers 6 17, including experimental data buffers

Do not expect identical markers on matching charts. Differences can result from these rules as well as broker prices, available history, chart periods, and time settings. A screenshot from one edition does not establish the appearance or behavior of the other.

Reading the default colors and trend context

The Asian high is orange and the Asian low is blue. Green sweep markers describe reclaimed lows; red sweep markers describe rejected highs. Blue and orange structure markers show upward and downward swing breaks respectively. Read the marker together with its reference candle and level, because color alone does not explain why the event qualified.

The EMA line in the dashboard summarizes whether the fast average is above or below the slow average. In MT4 this is informational and does not filter the markers. In MT5, trend alignment can affect the optional experimental system; it is not a requirement for every default sweep. The source conservatively uses a closed trend-timeframe candle rather than the candle currently forming.

How to install the indicator

  1. Download the source for your platform from the official link above and extract the archive if you chose a ZIP download.
  2. In the desktop terminal, select File → Open Data Folder. Use the folder opened by the terminal you actually intend to run.
  3. Place the MT4 source inside MQL4/Indicators, or the MT5 source inside MQL5/Indicators. An optional GoldSessionLiquidityFree subfolder keeps the installation organized.
  4. Open the source in the matching platform’s MetaEditor and compile it. Check the compiler result before attaching the indicator. Compilation creates the matching .ex4 or .ex5 executable.
  5. Return to the terminal, refresh the Navigator indicator list if needed, and attach the indicator to the chart.
  6. Review the Inputs tab, especially broker time conversion. Allow chart and H1 history to load before evaluating the display.

The folder structure is explained in the official MetaTrader 5 files and folders guide; MetaTrader also documents attaching an MT4 custom indicator and changing its inputs. Renaming a file extension does not convert MQL4 code into MQL5 code.

For a first visual check, M5 or M15 provides an understandable intraday view of the Asian range. These are example chart periods, not optimized or proven trading settings. Give each copy a different InstanceID when attaching multiple instances to the same chart.

Reconstructed XAUUSD M15 chart with completed Asian high and low, sweep markers, and swing-break markers from the MT5 indicator.
XAUUSD M15 example reconstructed from MT5 Strategy Tester OHLC and indicator-buffer data. It explains historical overlays; it is not a direct platform screenshot, an MT4 runtime test, or evidence of trading returns.

Aligning sessions and broker time

The indicator converts historical broker-server timestamps to UTC before assigning session context. Its default assumes a broker operating at UTC+2 in winter and UTC+3 during European daylight saving time. That assumption must be checked against your broker; it is not automatically verified.

In MT4, adjust BrokerWinterUTCOffset and BrokerEUDST. In MT5, adjust BrokerWinterUTCOffsetHours and choose either European DST or a fixed offset with BrokerClock. A fixed-offset broker should not inherit a seasonal adjustment simply because it is the default.

Session windows modeled by Free v1.10
Session MT4 MT5
Asia 00:00–06:00 UTC by default 00:00–06:00 UTC by default
London 08:00–17:00 UTC in winter; 07:00–16:00 in summer 08:00–16:00 UTC in winter; 07:00–15:00 in summer
New York 13:00–22:00 UTC in winter; 12:00–21:00 in summer 13:00–22:00 UTC in winter; 12:00–21:00 in summer

London uses European seasonal dates, while New York uses US dates. The London window is nine hours in MT4 and eight hours in MT5. These are the code’s analysis windows, not a statement of your broker’s complete trading schedule. MT5 also excludes weekends from its session mask; MT4’s label is based on the time window.

When the Asian lines appear

The default range covers candles opening from 00:00 UTC up to, but excluding, 06:00 UTC. The indicator shows that day’s completed range only after the configured end time. It does not draw a finished session’s future high and low onto earlier candles.

The calculation depends on the candles available in the chart history. MT4 accepts at least one eligible candle; MT5 requires at least two. Neither check proves that every part of the session has been downloaded. Large chart periods or gaps can produce an incomplete representation or no range. Inspect the actual session candles when a line appears unexpected.

In MT5, London and New York are enabled by default, and Asia is disabled as a detection session. TradeLondon, TradeNewYork, and TradeAsia select analysis windows; despite their names, they do not authorize or execute orders.

How the markers work

1. Confirmed swings supply reference levels

A swing is a local high or low compared with neighboring candles. With the default SwingStrength=3, the calculation checks three candles on each side. A reference becomes eligible only after its confirming candles have closed before the event being evaluated.

The indicator searches backward within MaxSwingAge, default 90 bars. With RequireFreshLevel=true, a pivot level already breached by intervening prices is excluded. This helps distinguish an untouched reference from one price has already crossed. In MT5, that freshness rule applies to pivot references; it should not be assumed to provide the same test for every Asian-session reference.

2. A sweep requires penetration and a return

A low sweep occurs when a closed candle trades below an eligible reference, then closes back above it. A high sweep reverses the pattern: price trades above the reference and closes back below. A sufficiently large rejection wick is also required.

The minimum penetration is the larger of a fixed point threshold and a volatility-scaled threshold. Defaults are 10 symbol points and 0.10 of the prior true-range average. The minimum rejection wick is 20% of the full candle range. A symbol point is the platform’s quoted point value; it can differ from a contract’s minimum tradable tick size. It is not automatically the same as a pip or one dollar of gold price.

MT4 applies these rules to confirmed swings and suppresses a candle that qualifies as both a low sweep and a high sweep. MT5 can use either a swing or the completed Asian boundary. It additionally requires a directional close position of at least 55%, an enabled session, and a candle that has not already closed beyond its pre-sweep structure reference. Those extra conditions explain why a visually obvious wick may receive no MT5 marker.

Low-sweep and high-sweep diagrams showing wick penetration and a completed close back across a prior confirmed level.
Simplified low-sweep and high-sweep mechanics. The editions apply different additional filters; neither pattern alone predicts what the next candle will do.

What “liquidity” means here: the source analyzes open, high, low, and close prices. It does not inspect real resting orders, identify who traded, or prove that stops were executed. A sweep marker is a repeatable price-pattern label that can support chart study.

3. Swing-break markers record a separate event

A break-up marker requires a closed candle to cross above a confirmed swing high by more than two symbol points, with the preceding close on the other side of that threshold. A break-down marker uses the corresponding condition below a swing low.

These blue/orange markers are independent structural observations. They do not necessarily follow a sweep and should not be read as the MT5 experimental BUY/SELL signal. In MT5, the experimental market-structure-shift sequence uses a different reference: the extreme of candles preceding the sweep.

Volatility scaling and closed-bar timing

Both editions use an arithmetic average of preceding true ranges, with a default period of 14. Although several input names say “ATR,” this is a simple prior true-range mean, not the usual Wilder-smoothed ATR calculation. The evaluated event candle is excluded from that average.

The detection details above follow the public MT4 v1.10 implementation and MT5 v1.10 implementation. When studying a later release, check its source and change notes before assuming these exact thresholds still apply.

Event markers are confirmed from closed candles. Pivot confirmation deliberately adds delay; a marker cannot be expected before the necessary evidence exists. The forming candle is not used to confirm arrows. Historical data corrections, changed inputs, and history reloads can still change a recalculated chart, so an absolute “never repaints under any circumstances” claim would be inappropriate.

Reconstructed XAUUSD M5 chart showing historical MT5 sweep and structure events with an Asian low reference.
XAUUSD M5 historical reconstruction from MT5 Strategy Tester data and indicator buffers. Multiple markers illustrate the display logic, not a sequence of executed trades or a performance result.

The most useful inputs to understand

Start by understanding the defaults before changing several settings at once. The table records the published v1.10 defaults; it is not a recommended risk allocation or an optimization result.

Selected inputs and defaults — swipe sideways on small screens
Purpose MT4 input MT5 input
Winter server offset BrokerWinterUTCOffset=2 BrokerWinterUTCOffsetHours=2
Seasonal server clock BrokerEUDST=true BrokerClock=BROKER_EU_DST
Asian window AsianStartUTC=0; AsianEndUTC=6 AsianStartUTCHour=0; AsianEndUTCHour=6
Asian lines ShowAsianLevels=true ShowAsianRange=true
Swing confirmation SwingStrength=3; MaxSwingAge=90; RequireFreshLevel=true
History scan MaxBarsToScan=900
Fixed penetration MinSweepPoints=10
True-range period ATRPeriod=14 MeanTrueRangePeriod=14
Scaled penetration MinSweepATR=0.10 MinSweepToATR=0.10
Minimum wick MinWickPercent=20.0 MinRejectionWickPct=20.0
EMA periods TrendFastEMA=20; TrendSlowEMA=50
Equity budget input RiskBudgetPercent=0.50
Manual prices ManualEntryPrice=0; ManualStopPrice=0; ManualTargetPrice=0
Commission estimate per lot CommissionRoundTrip=7.00 CommissionPerLotRoundTrip=7.0

Higher swing strength changes which pivots qualify and increases the confirmation delay. Larger penetration or wick thresholds make sweep selection more restrictive. Increasing the scan length changes how much history is processed, not the strength of any individual event.

Using the manual risk planner responsibly

The planner starts with account equity and the percentage entered in RiskBudgetPercent. Enter an intended entry and stop in the Inputs tab; zero prices leave the planner awaiting those values. A target is optional. The indicator does not choose the manual entry or stop for you.

The basic calculation is budget = equity × percentage ÷ 100. Volume is estimated from that budget and the expected cost of moving from entry to stop, including the manually entered round-trip commission. The default commission value is a placeholder assumption, not a detected broker charge.

MT5 calculation

The MT5 edition calls OrderCalcProfit to estimate the price-move loss in account currency using the symbol’s calculation rules. It then adds the commission estimate, respects broker volume limits, and rounds volume down to the volume step. If even the minimum lot would exceed the budget, the panel reports that condition.

MT4 limitation in v1.10

Independently calculate and verify position size before using the MT4 planner’s result. Its v1.10 tick-value/tick-size conversion has not been validated against actual broker outcomes across symbol specifications. In particular, the interpretation of tick-size units needs confirmation. Treat its lot output as an unverified estimate, not an executable sizing instruction. Consult your broker’s contract specification and a separately checked calculation.

For both editions, the target ratio is based on price distance. It is not a net return after all trading costs. The planner does not check total portfolio exposure or available margin, and nominal stop loss is not a guaranteed loss limit during gaps or slippage. Panel volume is displayed to two decimals, so symbols supporting finer increments need an additional precision check.

MT5 experimental signals: optional and off by default

The MT5 source contains an additional research feature controlled by ShowExperimentalSignals. Its default is false, and the MT4 edition does not include this system. Ordinary sweep and swing-break overlays remain useful without turning it on.

When enabled, the system looks for a qualifying sweep followed by the first later closed candle breaking pre-sweep structure, normally within six candles. A sufficiently deeper adverse re-sweep invalidates the candidate. Candle-range, spread-history, directional-efficiency, and optional trend-alignment filters further restrict selection.

A heuristic score combines fixed weights for the pattern, reference, wick, session, EMA direction, and confirmation behavior. The default minimum is 65/100. A score of 80 does not mean an 80% chance of success.

Experimental buffers can provide a confirmation-close entry reference, stop, and targets at 1R, 2R, and 3R. ShowCurrentTradePlan is separately off by default. These are historical research calculations, not promises of live execution at the displayed prices. Pop-up, sound, and push settings apply to these experimental signals, not ordinary MT5 sweep markers.

A practical chart-study workflow

  1. Verify context. Record the edition, symbol, chart period, broker offset, and DST setting. Confirm that the Asian window matches the intended UTC candles.
  2. Read the completed range. Identify the day’s Asian high and low after its end time. Check for missing historical candles before interpreting the range.
  3. Inspect the reference. For a marked sweep, locate the eligible pivot or, in MT5, the completed Asian boundary. Check penetration, the closing price, and rejection wick.
  4. Separate observations. Record the sweep, subsequent structure behavior, and EMA context individually. Do not turn a single colored marker into an automatic order instruction.
  5. Document subsequent behavior. Save the chart at the event and after a fixed observation period. Include examples that failed to continue as well as attractive examples.
  6. Check any hypothetical plan independently. Verify sizing, costs, and contract specifications before comparing scenarios. Keep experimental MT5 analysis separate from default-overlay observations.

The dashboard helps organize this review: symbol and timeframe, session, trend direction, spread context, recent events, and planning values are visible together. It refreshes when new chart bars are processed. Its UTC display is a chart-bar timestamp, and spread/equity values are refresh-time snapshots.

Troubleshooting common questions

What you see What to check
Indicator missing from Navigator Confirm the platform, data folder, indicator subfolder, and compiler result; then refresh the list.
No Asian lines Check the converted time, session end, display switch, chart period, and available same-day history.
No sweep at an obvious wick A wick alone is insufficient. Check pivot confirmation, freshness, penetration, reclaim/rejection close, wick percentage, and MT5-specific filters.
No MT5 BUY/SELL arrows This is the default configuration. Experimental signals are off and remain separate from free analysis markers.
Blank or loading MT5 display Allow sufficient chart and trend-timeframe history to load. The indicator waits for EMA data rather than calculating a provisional trend score.
Lot value unavailable Check equity availability, positive entry/stop prices, different entry and stop levels, and broker symbol specifications.
Panel values seem unchanged The panel does not refresh every tick. Wait for a new chart bar.
Multiple panels conflict Give each attached instance a distinct InstanceID.

Frequently asked questions

Is this an Expert Advisor?

No. It is an indicator for analysis and planning. Neither free edition opens, modifies, or closes trading positions.

Does a sweep mean a reversal is certain?

No. It identifies a completed price-pattern condition. Price can continue, reverse briefly, consolidate, or move against the apparent rejection afterward.

Are MT4 and MT5 results interchangeable?

No. The editions have different sweep rules, session handling, planner implementations, and buffer maps. Record the edition when documenting an example.

Are the pictures performance evidence?

No. Chart examples explain display elements and calculations. The historical MT5 examples in this guide are reconstructed from Strategy Tester OHLC and indicator-buffer data. The explanatory diagrams are original concept illustrations. Neither is presented as a direct platform screenshot, and the MT5 examples do not establish MT4 runtime behavior. None establishes profitability.

Can developers read the outputs?

Yes. The source documents the public buffers. MT4 uses six buffers for Asian levels, sweeps, and swing breaks. MT5 uses 17, including optional experimental outputs that remain empty when disabled. Use the matching edition’s documented map.

Sources and related reading

This guide documents the published Free v1.10 source behavior. For downloads, source inspection, and later release notes, use the official MT4 Code Base entry and official MT5 Code Base entry. Platform references used here are the MT5 folder guide, MT4 indicator attachment guide, and MQL5 OrderCalcProfit reference.

For related chart-analysis material, read the Smart Liquidity Hunter MT4 and MT5 review, or browse the ForexReview.top guides. Smart Liquidity Hunter is a separate indicator; its features should not be assumed to apply to this release.